Shop All

PSC Cylinder Assist Tie Rod Clamp, designed for hydraulic application, fits 1.375 Inch Diameter Tie Rod, includes Grade 8 hardware, Zinc Plated for corrosion resistance, 6-bolt secure clamp system, 5/8-18 cylinder-mounting bolt, 100 percent Bolt On

PSC Cylinder Assist Tie Rod Clamp, designed for hydraulic application, fits 1.25 Inch Diameter Tie Rod, includes Grade 8 hardware, Zinc Plated for corrosion resistance, 6-bolt secure clamp system, 5/8-18 cylinder-mounting bolt, 100 percent Bolt On

PSC's Exclusive Big Bore XD2 Power Steering Gearbox is an essential, critical steering component for any Jeep JK with increased torque loads such as large tire sizes up to 37 Inches, locking front differentials, and larger aftermarket axles...

Performance Steering Components offers the highest quality power steering gearboxes, pumps, and cylinder assist components for most high-performance power steering applications. Improved component designs ensure superior handling and performance,...

PSC Steering Assist Cylinders provide the steering power you need to tackle the toughest trails...go where you want to go with PSC!

A 4.5 Inch Diameter Overdriven Billet Aluminum pulley for most TC Type power steering pumps.This pulley will fit most 1996-2006 Jeep 2.5L/4.0L applications to improve low RPM steering performance.material: Aluminum

PSC Power Steering Pump Kit for PSC Big Bore XD steering gear SG688/R, includes remote reservior, 4 Quarts of SWEPCO 715 Power Steering Fluid, Fluid Cooler, SR-VT, bracketry, hardware, fittings, and pre-assembled hoses to fit 2007-11 Jeep Wrangler JK 3...

Improve the power steering system flow rate and reign in fluid temperatures with an upgraded 8 Return Line and PSC 16 Inch Heat SInk Fluid Cooler Kit. Install this kit in conjunction with the PSC HK2091 -8AN High Pressure Hose Assembly for maximum power...

Make your Jeep JK Cylinder Assist Install look sharp with a PSC Crimped Cylinder Assist Installation Hose Kit. Made of high quality Kurt Tuff 5500 PSI High Pressure Hose and Kurt Hydraulics Couplings forworry-free performance on the trail...

A DIY Emergency Field Serviceable version of our crimped HK2036 Cylinder Assist Installation Hose Kit for Jeep JK that can come in handy in a pinch out on the trail.Includes:#6 Weatherhead High Pressure Hose (QTY 6FT)HA2-645, Weatherhead #6 45 Degree...

SWEPCO 715 Power steering/Hydraulic Oil is a new generation high performance oil designed to assure efficient, smooth operation of power-assisted steering and hydraulic systems. It is engineered and blended precisely from the very finest high VI...

Rigging plate designed for distribution of multiple loads and directions. Safe collection point for multiple winching applications. Prevents collecting multiple loads on a single shackle. Self-aligning shackle pin holes fit common 3/4 inch shackles. Pear...

Soft shackles may be used as a lightweight replacement connecting rigging for common steel screw pin shackles. The Factor 55 10 inch and 20 inch diameter Extreme Duty Soft Shackles are made in the USA under the uncompromised Factor 55 quality standards...

Perfect For that one-ton swap Inch the back of your TJ or YJ, the 60 Modular Rear Axle Truss is the most versatile truss available For the common 60 axle. This heavy duty truss system is designed to take serious abuse and reinforce your axle while also...

Artec Industries is excited to announce the Front Axle Coil Bracket Replacement For TJ, LJ, XJ, or ZJ. This bracket can directly replace your old, bent, rusted and wimpy OEM coil bucket while also providing the anti-sway bar, trackbar and shock brackets...

Beef up your front axle LCA brackets on your TJ, LJ, XJ, MJ, or ZJ. Also works great For TJ and LJ Rubicon Models. Do you have bent and mangled factory lower control arm brackets? Its no surprise since they are practically made of sheet-metal. These...

When used with an Artec 30 Truss, or Rubicon 44 Truss, this bracket provides an accurate location For you passenger side upper control arm mount. This bracket requires the use of a weld Inch sleeve and bushing (see options). 2 pieces included. Add Inch...

Artec Industries 14 bolt Pinion Guard is designed to keep your vulnerable pinion out of the rocks and Inch one piece. CNC cut from 3/8 inch thick mild steel, this guard is meant to take the worst you and the rocks can dish out. Included bridge to connect...

Artec Industries 14 bolt Pinion Guard is designed to keep your vulnerable pinion out of the rocks and Inch one piece. series: material: Steel

Artec Industries has pieced together this light and harness kit to allow you to easily wire up license plate lights on your new spare tire delete.Includes:Qty: 2 Miniature Dual LED Bolt LightsQty: 1 Deutsch-style waterproof connectorQty: 1 Two wire...

The only Odyssey PC1500 (Group 34 and 78 equivalent) Racing battery box guaranteed to out perform the competition! Sleek no-nonsense design gives you the peace of mind knowing your battery is secure Inch the most demanding environments. Mount must be...

Take your JK up a level or 3 Premium Aluminum Long Arm Kit for your JK For the Past 5 years, we've been testing 7075 Aluminum links in the ARTECON to ensure that they could handle the abuse of both extreme, heavy duty rock crawling and normal daily...

ARTEC JL A-pillar Single LED Cube Light Mount. Artec Industries is excited to announce our new JL Light Bar Mount for single cube (aka dually, D-series, or pod) LED Lights per side. Our mounts are constructed from rigid 1/8 inch thick steel and designed...

These heavy duty inner C gussets are designed to take serious abuse and reinforce your front Dana 30 or 44 JL or JT Inner C's. The 3/16" thick precision cut and formed components precisely contour and wrap around your inner c and add rigidity.Note:...

These heavy duty inner C gussets are designed to take serious abuse and reinforce your front Dana 30 or 44 JL or JT Inner C's. The 3/16" thick precision cut and formed components precisely contour and wrap around your inner c and add rigidity.Note:...

JL/JT Apex Front Axle Truss - A new era has begun with the arrival of the Apex truss! Artec Industries is proud to announce the next generation of patent pending axle trusses. This series of trusses not only builds on our experience as the world leader...

ARTEC JL Front Fender Chop Kit Brackets. Did you remove the bottom half of your Rubicon Fenders for clearance, only to lose your turn/marker lights and are left with a floppy factory fender? Artec Industries is excited to announce our new JL Front Fender...

JK APEX Front Axle Truss A new era has begun with the arrival of the APEX Truss! Artec Industries is proud to announce the next generation of Patent Pending axle trusses. This series of trusses not only builds on our experience as the world leader in...

A new era has begun with the arrival of the Apex truss! Artec Industries is proud to announce the next generation of patent pending axle trusses.This series of trusses not only builds on our experience as the world leader in axle truss design, it brings...

JK Rear 3-Link Bracket. When used with our JK Rear Truss, this heavy duty bracket is made to work Inch a Rear 3-Link Long Arm System. This item also provides you with a low profile, high-clearance alternative not currently obtainable with Rock Krawler's...

JK Rear Trackbar Bracket. This heavy bracket is designed to take serious abuse and replace your worn JK factory rear trackbar bracket. The 1/4 inch thick precision cut and formed components of this setup out perform the competition. This bracket offers...

JK Heavy Duty Raised Trackbar Bracket. This heavy bracket is designed to take serious abuse and replace your front 30 or 44 JK factory trackbar bracket. The 1/4 inch thick precision cut and formed components of this setup out perform the competition...

JK Apex Front Axle Truss - A new era has begun with the arrival of the Apex truss! Artec Industries is proud to announce the next generation of patent pending axle trusses. This series of trusses not only builds on our experience as the world leader in...

JK Apex Front Axle Truss - A new era has begun with the Arrival of the Apex truss! Artec Industries is proud to announce the next generation of patent pending axle trusses. This series of trusses not only builds on our experience as the world leader in...

JK HD Cross member. Artec Industries New JK HD Cross member is designed to give your 2007 - 2017 Jeep JK Wrangler better protection underneath the vehicle than the factory sheet metal. Designed using CAD files directly from the manufacturer, this HD...

Getting rid of your spare tire and factory bumper? This Spare Tie Delete will keep you legal and relocate your license plate.Artec Industries is excited to announce our new JK Spare Tire Delete Kit. This bracket is constructed from 1/16 inch thick...

JK Under Armor 4 Door Bellypan Kit. Artec Industries New Artec 3D Artec Industries New JK Under Armor is designed to give your 2007 - 2017 Jeep JK Wrangler full protection underneath the vehicle. Designed using CAD files directly from the manufacturer,...

This heavy bracket is designed to give you a universal trackbar mounting option for Dana 60 swap kits, especially those using our Low Profile Dana 60 Front Trusses. This bracket gives you several options to find the perfect geometry. The 1/4 inch thick...

Artec's shock tower is the the strongest and easiest way to mount your shocks, coilovers, air shocks, or struts.Details:Sold as a pair!CNC Laser Cut and bent from 1/4 inch steelMounts with two boxed tabs with a 1/2 inch hole and adjustable to any...

Clean, low-profile lines and a high-clearance design make these Artec Industries shock mounts strong parts when installed. The heavy steel units are designed to replace your worn shock brackets.Details:Sold as PairThey require welding onto the side of...

Truss Upper Link Mounts. These Link Mounts are designed to mount on a flat surface such as a truss. The bend strengthens the mount so no additional reinforcement is needed. They are CNC cut and bent from 1/4 inch thick mild steel.Details:Sold as...

Lower Link Axle Brackets (pair). With our new line of brackets, we want to introduce a better looking product that has that custom one off look and solve some of the issues that have plagued some of the generic brackets on the market, thus making them...

Use of this Kit may require an optional tuner which has access to adjusting Gear Ratio and Tire size. Your actual programmer settings may differ from the axle ratio and tire size on your vehicle depending on Tone ring tooth count used. If using the 60...

Baja Designs next generation Squadron SAE fog pocket kit for the Toyota Tacoma(12-22)/4Runner (10-22) and Tundra (14-21) is the perfect road-legal auxiliary fog light on the market today. Engineered with all-new aspheric projector optics and with our...

Baja Designs next generation Squadron SAE is the perfect road-legal auxiliary fog light on the market today. Engineered with all-new aspheric projector optics and with our advanced LED technology provides a performance increase in luminous flux of 56...

Baja Designs next generation Squadron SAE is the perfect road-legal auxiliary fog light on the market today. Engineered with all-new aspheric projector optics and with our advanced LED technology provides a performance increase in luminous flux of 56...

The Fast Fid is a rope splicing tool designed for rapid repairing/splicing of synthetic winch lines. The compact 2 piece design includes a unique wire grip for holding the end of winch ropes. No tape or other tools required.Trail repair takes only...

Hitchlink 2.0 Reciever Shacle Mount. Use your receiver as a recovery tow point.series: HitchLinkmaterial: 6160 Aluminumcolor: Gray