-
Air Lift LoadLifter 5000 series kits are their heaviest-rated kits for hauling or towing heavy loads. They're engineered and built with reinforced bellows, and end caps made of ultra high strength Zytel nylon...strong as steel, but it weighs less and is...$431.99
-
Super Duty HD Steering Kit 17-20 F250/F350 Super Duty Apex Chassis. At APEX we like to say our quality is not consistent, it's constantly evolving. We rely entirely on engineering, in-house and off-road testing as well as customer feedback to decide on...$1,150.00
-
Super Duty HD Steering Kit For 11-16 F250/F350 Super Duty Apex Chassis. At APEX we like to say our quality is not consistent, it's constantly evolving. We rely entirely on engineering, in-house and off-road testing as well as customer feedback to decide...$1,150.00
-
RAM HD Steering Kit For 14-20 Ram 2500/3500 Apex Chassis. At APEX we like to say our quality is not consistent, it's constantly evolving. We rely entirely on engineering, in-house and off-road testing as well as customer feedback to decide on the best...$1,150.00
-
A direct replacement extreme duty Tie Rod and Drag Link assembly to replace your underperforming OE steering. Oversized tie rod and drag link ends, connected by massive DOM tubes, eliminates death wobble and tightens up steering under the most extreme...$995.00
-
Our clamps are milled and tapped to accept the included 1/2 inch grade 8 bolt with washers. The washers provided can be used as spacers to fit your stabilizer. Finished with a durable zinc coat.SStandard Stabilizer Clamp for FalconPlease Note:Factory...$89.99
-
2.5 Ton JL/JT Extreme Currie 70 Inch Axle Swap Steering Kit. Massive 2 inch Solid USA made 7075 T6 cold finish Aluminum link with hexed ends for easy adjustmentsStock Location - Standard Stabilizer Clamp for Fox ATS1.25 inch forged TREsAnti-flop ends...$1,089.98
-
Our clamps are milled and tapped to accept the included 1/2 inch grade 8 bolt with washers. The washers provided can be used as spacers to fit your stabilizer. Finished with a durable zinc coat.Standard ClampPlease Note:Factory stabilizers may need to be...$79.99
-
2.5 Ton JL/JT Extreme Currie 70 Inch Axle Swap Steering Kit. Massive 2 inch Solid USA made 7075 T6 cold finish Aluminum link with hexed ends for easy adjustmentsFlip Drag Link - With Taper Sleeve - Standard Stabilizer Clamp for Fox ATS1.25 inch forged...$1,109.97
-
Our clamps are milled and tapped to accept the included 1/2 inch grade 8 bolt with washers. The washers provided can be used as spacers to fit your stabilizer. Finished with a durable zinc coat.Standard Stabilizer Clamp for Fox ATSPlease Note:Factory...$89.99
-
2.5 Ton JL/JT Extreme Currie 70 Inch Axle Swap Steering Kit. Massive 2 inch Solid USA made 7075 T6 cold finish Aluminum link with hexed ends for easy adjustmentsFlip Drag Link - With Taper Sleeve - Standard Stabilizer Clamp for Falcon1.25 inch forged...$1,109.97
-
Our clamps are milled and tapped to accept the included 1/2 inch grade 8 bolt with washers. The washers provided can be used as spacers to fit your stabilizer. Finished with a durable zinc coat.SStandard Stabilizer Clamp for FalconPlease Note:Factory...$89.99
-
2.5 Ton JL/JT Extreme Currie 70 Inch Axle Swap Steering Kit. Massive 2 inch Solid USA made 7075 T6 cold finish Aluminum link with hexed ends for easy adjustmentsFlip Drag Link - With Taper Sleeve - Double Shear Hydro Assist Clamp1.25 inch forged...$1,129.97
-
Our clamps are milled and tapped to accept the included 1/2 inch grade 8 bolt with washers. The washers provided can be used as spacers to fit your stabilizer. Finished with a durable zinc coat.Standard ClampPlease Note:Factory stabilizers may need to be...$79.99
-
2.5 Ton JL/JT Extreme Currie 70 Inch Axle Swap Steering Kit. Massive 2 inch Solid USA made 7075 T6 cold finish Aluminum link with hexed ends for easy adjustmentsStock Location - Standard Stabilizer Clamp for Falcon1.25 inch forged TREsAnti-flop ends...$1,089.98
-
Jeep Wrangler JK/JKU Steering Box Stretch Kit. This kit is a fabricator kit. It moves the steering box 2 Inch forward on a 2-door or 4-door JK. With the optional offset track bar bracket, you can get up to 3.75 inch additional stretch in the front of...$309.98
-
2.5 Ton JL/JT Extreme Currie 70 Inch Axle Swap Steering Kit. Massive 2 inch Solid USA made 7075 T6 cold finish Aluminum link with hexed ends for easy adjustmentsFlip Drag Link - With Taper Sleeve - No Clamp1.25 inch forged TREsAnti-flop ends built-in...$1,019.98
-
Jeep Wrangler JK/JKU Steering Box Stretch Kit. This kit is a fabricator kit. It moves the steering box 2 Inch forward on a 2-door or 4-door JK. With the optional offset track bar bracket, you can get up to 3.75 inch additional stretch in the front of...$229.99
-
2.5 Ton JL/JT Extreme Currie 70 Inch Axle Swap Steering Kit. Massive 2 inch Solid USA made 7075 T6 cold finish Aluminum link with hexed ends for easy adjustmentsStock Location - Double Shear Hydro Assist Clamp1.25 inch forged TREsAnti-flop ends built-in...$1,109.98
-
JK Ultimate Raised Track Bar Bracket. This raised track bar bracket moves the track bar bolt 3 Inch higher for use when flipping the Drag Link to the top of the passenger side knuckle. It resets geometry to correct bump steer.1/4 Inch CNC cut and press...$84.99
-
2.5 Ton JL/JT Extreme Currie 70 Inch Axle Swap Steering Kit. Massive 2 inch Solid USA made 7075 T6 cold finish Aluminum link with hexed ends for easy adjustmentsStock Location - No Clamp1.25 inch forged TREsAnti-flop ends built-in (excludes pitman arm...$999.99
-
2.5 Ton JK/JKU Dynatrac Hard Core ProRock 60 (w/Steel Knuckles) 68.5 inch Axle 2 Inch Steering KitThis kit is bolt in ready.Stock Location - Standard Stabilizer ClampMassive 2 inch Solid USA made 7075 T6 cold finish Aluminum link with hexed ends for easy...$1,079.98
-
2.5 Ton JK/JKU Dynatrac Hard Core ProRock 60 (w/Steel Knuckles) 68.5 inch Axle 2 Inch Steering KitThis kit is bolt in ready.Flip Drag Link - With Taper Sleeve - Standard Stabilizer ClampMassive 2 inch Solid USA made 7075 T6 cold finish Aluminum link with...$1,099.97
-
2.5 Ton JK/JKU Dynatrac Hard Core ProRock 60 (w/Steel Knuckles) 68.5 inch Axle 2 Inch Steering KitThis kit is bolt in ready.Stock Location - Standard Stabilizer Clamp for Fox ATSMassive 2 inch Solid USA made 7075 T6 cold finish Aluminum link with hexed...$1,089.98
-
2.5 Ton JK/JKU Dynatrac Hard Core ProRock 60 (w/Steel Knuckles) 68.5 inch Axle 2 Inch Steering KitThis kit is bolt in ready.Flip Drag Link - With Taper Sleeve - Standard Stabilizer Clamp for Fox ATSMassive 2 inch Solid USA made 7075 T6 cold finish...$1,109.97
-
2.5 Ton JK/JKU Dynatrac Hard Core ProRock 60 (w/Steel Knuckles) 68.5 inch Axle 2 Inch Steering KitThis kit is bolt in ready.Flip Drag Link - With Taper Sleeve - Standard Stabilizer Clamp for FalconMassive 2 inch Solid USA made 7075 T6 cold finish...$1,109.97
-
2.5 Ton JK/JKU Dynatrac Hard Core ProRock 60 (w/Steel Knuckles) 68.5 inch Axle 2 Inch Steering KitThis kit is bolt in ready.Flip Drag Link - With Taper Sleeve - Double Shear Hydro Assist ClampMassive 2 inch Solid USA made 7075 T6 cold finish Aluminum...$1,129.97
-
Jeep Wrangler JLU Bolt-In 3-Link Front/4-Link Rear Double Triangulated Long Arm Upgrade. We set out 2 years ago to design a double triangulation for the JKU that solved many challenges and restrictions with the JK platform.Now we are taking that...$7,649.00
-
2.5 Ton JK/JKU Dynatrac Hard Core ProRock 60 (w/Steel Knuckles) 68.5 inch Axle 2 Inch Steering KitThis kit is bolt in ready.Stock Location - Standard Stabilizer Clamp for FalconMassive 2 inch Solid USA made 7075 T6 cold finish Aluminum link with hexed...$1,089.98
-
Jeep Wrangler JLU Bolt-In 3-Link Front/4-Link Rear Double Triangulated Long Arm Upgrade. We set out 2 years ago to design a double triangulation for the JKU that solved many challenges and restrictions with the JK platform.Now we are taking that...$7,399.00
-
2.5 Ton JK/JKU Dynatrac Hard Core ProRock 60 (w/Steel Knuckles) 68.5 inch Axle 2 Inch Steering KitThis kit is bolt in ready.Flip Drag Link - With Taper Sleeve - No ClampMassive 2 inch Solid USA made 7075 T6 cold finish Aluminum link with hexed ends for...$1,019.98
-
Jeep Wrangler JLU Bolt-In 3-Link Front/4-Link Rear Double Triangulated Long Arm Upgrade. We set out 2 years ago to design a double triangulation for the JKU that solved many challenges and restrictions with the JK platform.Now we are taking that...$7,399.00
-
2.5 Ton JK/JKU Dynatrac Hard Core ProRock 60 (w/Steel Knuckles) 68.5 inch Axle 2 Inch Steering KitThis kit is bolt in ready.Stock Location - Double Shear Hydro Assist ClampMassive 2 inch Solid USA made 7075 T6 cold finish Aluminum link with hexed ends...$1,109.98
-
JK 2-Door Bolt-In 3-Link Front Long Arm Upgrade. Our 3-link kit is one of the easiest to install on the market. The cross member and 3-link mount are 100 percent bolt-in.Kit includes:Truss no Upgrade no stretchBolt-in cross member with lower link...$2,449.99
-
2.5 Ton JK/JKU Dynatrac Hard Core ProRock 60 (w/Steel Knuckles) 68.5 inch Axle 2 Inch Steering KitThis kit is bolt in ready.Stock Location - No ClampMassive 2 inch Solid USA made 7075 T6 cold finish Aluminum link with hexed ends for easy adjustments1.25...$999.99
-
JK 2-Door Bolt-In 3-Link Front Long Arm Upgrade. Our 3-link kit is one of the easiest to install on the market. The cross member and 3-link mount are 100 percent bolt-in.Kit includes:Truss no Upgrade no stretchBolt-in cross member with lower link...$2,249.98
-
2.5 Ton JL Super Duty Kit for Reid Knuckles (2005-2011)Kit includes:Standard Stabilizer Clamp1 Tie Rod with 2 Inch USA made 7075 T6 cold finish Aluminum and 1.25 inch forged Tie Rod ends1 Drag Link with 2 Inch USA made 7075 T6 cold finish Aluminum and 1...$1,479.98
-
JK 2-Door Bolt-In 3-Link Front Long Arm Upgrade. Our 3-link kit is one of the easiest to install on the market. The cross member and 3-link mount are 100 percent bolt-in.Kit includes:Truss no Upgrade no stretchBolt-in cross member with lower link...$2,149.99
-
2.5 Ton JL Super Duty Kit for Reid Knuckles (2005-2011)Kit includes:Standard Stabilizer Clamp for Fox ATS1 Tie Rod with 2 Inch USA made 7075 T6 cold finish Aluminum and 1.25 inch forged Tie Rod ends1 Drag Link with 2 Inch USA made 7075 T6 cold finish...$1,489.98
-
JK 2-Door Bolt-In 3-Link Front Long Arm Upgrade. Our 3-link kit is one of the easiest to install on the market. The cross member and 3-link mount are 100 percent bolt-in.Kit includes:Truss no Upgrade no stretchBolt-in cross member with lower link...$2,324.99
-
2.5 Ton JL Super Duty Kit for Reid Knuckles (2005-2011)Kit includes:Standard Stabilizer Clamp for Falcon1 Tie Rod with 2 Inch USA made 7075 T6 cold finish Aluminum and 1.25 inch forged Tie Rod ends1 Drag Link with 2 Inch USA made 7075 T6 cold finish...$1,489.98
-
JK 2-Door Bolt-In 3-Link Front Long Arm Upgrade. Our 3-link kit is one of the easiest to install on the market. The cross member and 3-link mount are 100 percent bolt-in.Kit includes:Truss no Upgrade no stretchBolt-in cross member with lower link...$2,124.98
-
2.5 Ton JL Super Duty Kit for Reid Knuckles (2005-2011)Kit includes:Double Shear Hydro Assist Clamp1 Tie Rod with 2 Inch USA made 7075 T6 cold finish Aluminum and 1.25 inch forged Tie Rod ends1 Drag Link with 2 Inch USA made 7075 T6 cold finish Aluminum...$1,509.98
-
JK 2-Door Bolt-In 3-Link Front Long Arm Upgrade. Our 3-link kit is one of the easiest to install on the market. The cross member and 3-link mount are 100 percent bolt-in.Kit includes:Truss no Upgrade no stretchBolt-in cross member with lower link...$2,024.99
-
2.5 Ton JL Super Duty Kit for Reid Knuckles (2005-2011)Kit includes:No Clamp1 Tie Rod with 2 Inch USA made 7075 T6 cold finish Aluminum and 1.25 inch forged Tie Rod ends1 Drag Link with 2 Inch USA made 7075 T6 cold finish Aluminum and 1.25 inch forged...$1,399.99
-
JK 2-Door Bolt-In 3-Link Front Long Arm Upgrade. Our 3-link kit is one of the easiest to install on the market. The cross member and 3-link mount are 100 percent bolt-in.Kit includes:Truss no Upgrade no stretchBolt-in cross member with lower link...$2,199.99
-
2.5 Ton JK Super Duty Kit of Reid Knuckles (2005-2011).This kit works with JK or JKU's with a 2005-2011 super duty Axle. It utilizes a Reid knuckle and our proprietary hi-steer arm kit.Kit includes:Standard Stabilizer Clamp1 Tie Rod with 2 Inch USA made...$1,479.98
-
JK 2-Door Bolt-In 3-Link Front Long Arm Upgrade. Our 3-link kit is one of the easiest to install on the market. The cross member and 3-link mount are 100 percent bolt-in.Kit includes:Truss no Upgrade no stretchBolt-in cross member with lower link...$1,999.98