Adapters, Wiring, & Accessories

Ensuring your FLEX ERA® LED Light Bar operates at its best means providing it with the right power setup. Our wiring harness is crafted for high power demands, ensuring your light bar shines bright and steady. Included is a robust 60-amp relay, a...

This replacement harness allows you to connect, power and operate a Gravity® LED Pro6 57" 9-Light light bar. Complete with (9) individual plug-n-play weatherproof DT connectors.

This replacement harness allows you to connect, power and operate a Gravity® LED Pro6 45" 7-Light light bar. Complete with (7) individual plug-n-play weatherproof DT connectors.

This replacement harness allows you to connect, power and operate a Gravity® LED Pro6 32" 5-Light light bar. Complete with (5) individual plug-n-play weatherproof DT connectors.

This replacement harness allows you to connect, power and operate a Gravity® LED Pro6 39" 6-Light light bar. Complete with (6) individual plug-n-play weatherproof DT connectors.

This replacement harness allows you to connect, power and operate a Gravity® LED Pro6 50" 8-Light light bar. Complete with (8) individual plug-n-play weatherproof DT connectors.

The Gravity® LED Pro6 light bar switch harness is designed to connect and operate 20"-57" Gravity® LED Pro6 light bars. Includes illuminated waterproof switch.

-96" Wire extension for one light -Available in 18" 48" and 96"  -Pre-terminated and covered with Vinyl Sleeve -High quality wire minimizes voltage drop -Easy Installation-Sold Individually

-Without switch for use with #6315 (Relay Harness Kit) to wire two additional lights-Operate Multiple Lights with One Switch -Includes 40 amp relay-Easy Installation-Sold Individually

-6315 Wiring Harness Includes a heavy duty 40 amp relay, rocker switch, fuses and mounting hardware-Installs up to two 130w Lights -Easy Installation with Factory Finish Look-Easy Installation-Sold Individually

-6311 3-Pin DT Wiring Harness for FLEX ERA lights -Includes a heavy-duty 40 amp relay, 3 position rocker switch, fuses, and mounting hardware -Installs up to two 130w Lights -Easy Installation with Factory Finish Look -Sold Individually

FEATURES -Designed to Wire and Operate 2 Backup Lights up to 110W -High-Quality Weatherproof Connectors -Extended Length For Easy Backup Light Wiring On All Vehicle Sizes -Complete Wiring Kit w/ Illuminated Red Light Switch -No Relay Required...

-63082 Wiring Harness for Two Cyclone LED Lights with Connectors-Designed Specifically for 2 Universal Cyclone LED Lights -Weatherproof Sealed Connectors

FEATURES -2 x Toyota H11 to DT 2-Pin Fog Light Adapter -Designed for 2012-2016 Toyota Tacoma with Factory Fog Lights -Plug-N-Play Deutsch 2-Pin Connector to H11 Adapter -No Cutting or Splicing Required -High Quality Weatherproof Connector -Designed to...

FEATURES -2 x Jeep Wrangler JK H16 to DT 2-Pin Fog Light Adapter -Designed for 2010-2018 Jeep JK Factory Fog Light Wiring Harness and Switch -Plug-N-Play Deutsch 2-Pin Connector to H16 Adapter -No Cutting or Splicing Required -High Quality Weatherproof...

- H13 to H4 Headlight Conversion Cable - Fits 2007 - 2013 Jeep JK Wrangler and other H13 Type Headlight Connectors - Converts H13 Connector to H4 Connector on Halogen Style Headlights - Rated for 55w/60w Headlights Only - Sold In Pairs - Item #6307

The Universal Wire Hider featuring 3M™ VHB™ double sided adhesive is as simple as it sounds. It is a ~3.3 ft strip of rubber extrusion that has an internal channel to help you hide your wires for a clean install of off-road lights and other accessories. ...

Getting error codes with your newly-installed LED bulbs? These 50W 6 Ohm LED Tail light resistors can solve the problem and as well help if you're having problems with bulbs flashing too fast and burnt-out bulb notifications.Includes:Two (2)...

This universal 12v wiring harness is capable of powering up to 12 amps and has been specifically designed for our Onx6 and Squadron XL. This harness Does Not have an option for a momentary switch. It includes an On/Off toggle button to provide power to...

This universal 12v wiring harness is capable of powering up to 12 amps and has been specifically designed for our Fuego, PreRunner, LaPaz, Squadron and SII. It includes an On/Off toggle button to provide power to the lights. This harness comes ready to...

This harness is all you will need to in order to get full versatility and functionality from your LP9 lights!The Baja Designs LP9 Pro Harness Includes:Wiring harness with plug and play Deutsch style connectorsBuilt in splitter to power two LP9...

This is the lower LED harness specifically for the Kawasaki KX450F. This harness Includes an On/Off handle bar switchseries: Motorcycle Accessories

This plug and play 55 inch universal wiring harness is compatible with the OnX, OnX6, XL (Pro and Sport) and XL-R (Pro and Sport) LED lights. This wiring harness can be used with Part 44-7550.color: Blackseries: OnX S8 Series

This universal 12v wiring harness is capable of powering up to 12 amps and has been specifically designed for our LP9 Sport Series. This harness Does Not have an option for a momentary switch. It includes an On/Off toggle button to provide power to the...

This wiring harness has been designed for a universal application. The requirements for this harness are that it needs a battery to run off of and the bike Must have enough DC power in order to run the light you are trying to purchase.This harness comes...

This harness takes all the guess work out of installation and is incredibly high quality suited for race use! Put your dimmer mode to use! This harness allows you to use the high beam or toggle switch to turn on the light bars.color: Blackseries: S8...

Do you love the look of backlit lighting and want to take full advantage of this functionality included with our LP lights? This harness was designed specifically for those without a backlight wiring solution looking to add it to their current harness...

Sheathed, pinned and ready to go! We wanted to make sure that any enthusiast that wanted to add an additional LP series light could do so with ease, just be sure to check the notes below to verify you aren't over drawing on your harness.Notes /...

This plug and play 55 inchuniversal wiring harness is compatible with the Squadron (Pro and Sport) and S2 Pro LED lights. This wiring harness can be used with Part 44-7550 or 64-0088 see related items section for product.series: Squadron S2 Seriescolor:...

This harness was designed with intention of being used in conjunction with power modules such as sPOD, Switch-Pros and factory upfitter systems.This harness will ensure that you don't run power to both the high and low circuits at the same time when...

Complete harness for Baja Designs XL (Pro and Sport) and OnX6 plus LED Lights. This harness takes all the guess work out of installation and is incredibly high quality suited for race use! This harness allows you to use the high beam or toggle switch to...

This prefabricated wiring harness splitter is designed to easily wire two Onx6 light bars together. It comes prefabricated with the 3 pin connectors. We recommend no more then 8 Cells should be wired into one wiring harness.series: OnX S8 Seriescolor:...

This harness was designed for someone looking for a harness that is long enough to reach the mounting location of your RTL on your two or four seat Can-Am or RZR. The harness comes equipped with high quality sheathing and a relay to power all the...

The RIGID Anti-Flicker PWM Adaptor eliminates headlight flicker in 2007-2013 Jeep JK models. A limited number of Jeep JK users may see a flicker as a result of the PWM electrical system used on these vehicle models. This adapter will store power during...

This RIGID 3 amp flasher module provides seven flashing options for your LED lighting components. It is easy to install and works off of the auxiliary switch to your lights. This model features the following modes: Single Simultaneous: Both sides flash...

This harness for your RIGID LED Lights has an easy to use Three Position Switch: On/Off/Auto when in reverse and is used for SR-M and SR-Q Series Back Up Kits.

This RIGID LED Light Bar Resonance Damper is designed specifically to fit seamlessly in-between the heat sink fins of your LED light bar. This Resonance Damper will reduce the amplitude of mechanical vibrations and whistling noise when travelling at high...